Set how reading (measurement) units are displayed

You can set how reading (measurement) units are displayed in your account. By default, readings are set to be displayed in Imperial and temperature readings are set to a whole degree.

NOTE

Wind speed unit of measurement (mph, km/h, kn) is set in the profile of a sensor.

How to change how reading units are displayed

  1. From the tab / navigation bar, tap (Settings menu).
  2. Tap Manage Devices.
  3. Tap Units of Measure / Display Temp Tenths.
  4. Set the settings.

    5. Units of Measure - sets how sensor readings are displayed.

    Imperial (US) - °F / inHg / mph / inches

    Metric - °C / hPa / km/h / milimeters (mm)

    Temperature in Tenths - sets if temperature readings include the tenth of a degree. When set to OFF, temperature readings are displayed as a whole degree (default setting).

    For example if a temperature reading is 65.1°, when the Temperature In Tenths is set to ON the reading is displayed as 65.1° and when set to OFF it's displayed as 65°.

    NOTE

    Does not set the temperature in tenths for the current condition or forecast information - which is only displayed as a whole degree.

  5. Tap Save to update.